This is a a custom made metal filler neck to use in place of the stock OEM rubber filler neck. It comes with 6 inches of fuel rated hose to connect to your metal or poly tank. You will need to use a vented gas cap at the very least. Some of our customers opted to plumb their own vent line into the neck and route the vent line in various ways. This is up to you. Filler neck will fit left or right side.
~PLEASE NOTE~ WE MADE THESE FILLER NECKS APPROXIMATELY 10 YEARS AGO AND SOLD SEVERAL HUNDRED OF THEM. WE HAVE HAD MANY SATISFIED INSTALLATIONS. IT IS OUR DETERMINATION THAT APPROXIMATELY 25% OF THE METAL TANKS PRODUCED BY INTERNATIONAL HAD A SLIGHTLY DIFFERENT ANGLE COMING OUT OF THE NECK AT THE FUEL TANK ITSELF. THE OEM RUBBER FILLER NECK WAS FLEXIBLE ENOUGH TO COMPENSATE FOR THIS, HOWEVER, THIS METAL NECK WILL NOT WORK WITHOUT CHANGING THE WAY YOUR TANK SITS IN THE TANK COMPARTMENT. THERE IS NO APPARENT YEAR RANGE OR SERIAL NUMBER RANGE TO VERIFY WHAT ANGLE YOUR FUEL TANK IS. THEREFORE WE STOPPED SELLING THESE A NUMBER OF YEARS AGO. RIGHT NOW THE OEM RUBBER NECKS ARE ON BACK ORDER WITH NO CLEAR DATE OF BEING BACK IN STOCK. WE DECIDED TO RE-INTRODUCE THESE NECKS FOR THIS REASON. WE HAVE A VERY LIMITED SUPPLY LEFT. IF THE NECK DOES NOT FIT – WE WILL GLADLY ACCEPT THE RETURN OF THE PART IF IT IS CLEAN AND UN-MODIFIED.
YOU WILL HAVE TO DRILL YOUR OWN FOUR HOLES IN THE RING OF THIS NECK, USING YOUR QUARTER PANELS EXISTING HOLES AS A TEMPLATE – VERY SIMPLE. YOU WILL USE A STOCK VENTED GAS CAP, AND THE STOCK GAS CAP RETAINER RING.
MAJOR RUST TO THE GAS TANK COMPARTMENT AND INCORRECT PATCHING OF THIS AREA EVEN VERY SLIGHTLY CAN AFFECT HOW WELL THIS NECK WILL ALIGN TO YOUR TANK.